VLF metal detector "Smart Hunter"
<Step by step>
Metal detector Smart Hunter has three main parts: 1 – The coil, 2 – The app “Smart Hunter”, 3 – generator (based on arduino, internal generator or NE555 generator).The most important and hardest part to do is the coil. You have to do the coil with patience to get good results. Here I will explain what steps have to be followed to do everything right and that the final result does not disappoint us. This project is in development mode, you can try, expirement with different coils, try different generators. If you don’t understand something you can ask me here or in my email necodesarrollo@gmail.com
The main parts of metal detector:
1
2
3
Step 1: The generator and Rx circuit:
The first thing we have to do is the generator, because the generator will help us then adjust the coil. And of course install the Smart Hunter app if we don’t have it yet. The generator can be made with an arduino, with NE555, or using the internal generator of the app (if we use the internal generator of the app, we need an amplifier because the generator signal is weak and we have to amplify it). Here I leave the video tutorials how to make the generator with arduino and also how to use the app’s internal generator. We must check and make sure that the generator works well. For that we have to connect a speaker and if we hear a loud and uninterrupted beep then everything works fine. After checking and making sure that the generator works we can we can do the “Rx” coil circuit.
"Rx" coil circuit:
In the schematic we can see how the components are connected. We have the “Rx” coil and if it is necessary also the “Cx” coil for soft adjust (optional). In the image you can see how it connects. Then we have the capacitor “C1” which is used to adjust the resonance frequency of “Rx” coil, the value of this capacitor is 1mF if we are not going to adjust the resonance frequency in the “Rx” coil,
and if we are going to adjust then the value must be calculated we’ll see that later. Then we have two diodes “D1” and “D2” to protect the smartphone from overload (if that happens but it’s almost impossible). The “C2” capacitor also serves as a protection and has a value of 1 mF. Then we have a resistance “R2” of 1.4 kOm (we can use a value of 1.2 kOm up to 2 kOm) that helps us so that the smartphone detects that a MiniJack connector is connected to the headphone jack (in some smartphones it works without this resistance). And finally we have connected an input for MiniJack to connect audio output (we can weld directly if we do not have the connector). The schematic and the sketch for arduino to download you can find here: Schematic.
Mini Jack 3.5 mm type connector:
The circuit we saw connects to the 3.5 mm MiniJack type connector. In the image you can see the connections. It is quite simple we just have to connect “GND” of the circuit to the “GND” of the MiniJack, the “MIC” to the “MIC” of the connector and the audio output we can choose one of the two “Left channel” or “Right channel”. After making the generator and the circuit for “Rx” coil we can make the coil.
Step 2: The coil:
The coil is the most difficult part to make. I use Double-D type coil but it also serves the concentric coil. The Double-D type coil is cast with two coils (Rx coil and Tx coil) when adjusting them in inductance balance “IB” the coils are converted into a Double-D type coil. When a metal object is near the center of the Double-D coil the inductance balance is lost and in this way we know that there is a metal object near the coil. To make the coil we use wire thickness 0.6 mm for Tx coil and 0.2 mm for Rx coil. In the video we can see how to make and adjust the coils. After filling the mold with the epoxy resin, the balance can get loose and there is no way to move the coils for adjust it again because they are inside the epoxy resin. In this case, if the “amp” value (which indicates the balancing adjustment) is not more than 1000, we can adjust it again with the small coil called “Cx” coil. “Cx” coil is a small coil that can have 4 to 8 turns with a diameter of 3 cm. As a mold to make the Double-D coil you can use 3D model to print on a 3D printer or foam plastic. You can see the videos with mold made with 3D model printed with 3D printer.
3D printed mold for Double-D type coil
How to use "Cx" coil if we have lost the balance:
To return the lost balance (if this happened) we can put a small coil called “Cx” coil. “Cx” coil can have from 4 to 8 turns of wire thickness 0.2 mm. We must connect this coil in series as you can see in the image, and we must place it on top of the central part (more or less) of the “Tx” coil .
To adjust the balance we must move slowly “Cx” coil looking at the “amp” value of the application. We must move in one of the directions as you can see in the image. We move in the direction where the “amp” value goes down. When “Cx” coil is at the point of balance we must fix it with glue so that it remains fixed. It is necessary to fix the coil well.
How to adjust resonance frequency:
To get the maximum performance from the coil you must adjust the resonance frequency. Resonance frequency makes a similar effect as swings, allows us to get maximum performance from the coil without spending more energy from the battery. To adjust the resonance frequency we have several options. First we have to decide what frequency of work we want for our “Double-D” coil. I use the 5.5 kHz frequency. The resonance frequency of the “Tx” coil must match the generator frequency! The option number one is to calculate the capacitor value that we will need to obtain the necessary frequency, and for this we must know at least the inductance of the coil. We must measure the inductance of the coil “Tx” with an inductance meter (if you do not have an inductance meter you can see how to make one on my website in the section “Arduino Multimeter“). Here I leave a link that will help you calculate the resonance frequency if we know the inductance: Inductance calculator. Another way is to use one of my applications called “RFinder”. It is an application that scans the coil to find the resonance frequency. We just have to make a small circuit that we will connect to the smartphone and the coil. The circuit is very simple, it has only a couple of capacitors and a resistor. You can see how to use this app on this “RFinder” page. In the same way we can adjust “Rx” coil but “Rx” coil must have the resonance frequency 100 hz less than “Tx” coil.
Step 3 - How to use the app "Smart Hunter":
To turn on the detector we must turn on generator (if we use arduino) and press this button “Play”).
Now the app is analyzing the signal it receives from the coil.
When the main button is in this position the detector is in the “Dynamic mode”, which means that we have to move the detector so that it detects the objects or moves the objects.
In “Dynamic mode” the detector is self-adjusting to the ground.
This way that you can see in the image is the “Static Mode” in this mode it is not necessary to move the objects so that the detector detects them, in this mode it works as “Pinpointer” and it no longer adjusts automatically but uses the last adjustment of “Dynamic mode”. So if the detector in this mode is mismatched we must again press “Dynamic mode” (near the ground) to be self-adjusted and then return to “Static mode”.
This button serves to increase the sensibility.
This button serves to lower the sensibility.
The components you can buy here:
These are some basic knowledge we need to be able to correctly use the “Smart Hunter” metal detector.
Summary:
After following the steps indicated above we have the detector done, we just have to make the case where we put all this, but we will talk about that in one of the next post. To power the detector we use 5 volts stable for this we can use a step-up inverter that will provide us with a very stable current. About supply and more tricks I will write more posts, SUBSCRIBE TO MY BLOG if you are not yet subscribed to receive your email notices when I am going to publish a new posts! If you have any questions write in the comments or to my email necodesarrollo@gmail.com
Ciao scusa vorrei sapere se ho capito lo schema cin arduino, il polo + e il polo – vanno sotto batteria supplementare, poi i collegamenti dello schema della bobina rx sul lato destro vanno collegati al connettore maschio e sul laro sinistro che quello che non capisco dove vanno collegati che sarebbero pin 6, e pin 7 grazie..
Hello, how can I discriminate metals and how I can have more sensitivity. I can have the source code of smart Hunter.
Thanks
I am not finish yet the discrimination part, to get more sensetivity you can adjust better the balance and use coil with bigger diameter
the best homemade metal detector, next to a professional … easy to build and with an excellent search .. I recommend for red earth to make shielding on coils tx / rx.
Congratis neco
Thank you Adriano!
SHOW
hola buen día, tengo problemas para conseguir el MCP6022 acá en México mi pregunta es, lo puedo sustituir por un TL082CP GRACIAS
saya masih belum tahu Ukuran membuat coil tx maupun rx, diameter, jumlah putaran , dll
diameter Rx and Tx 16cm
Hocam bu yazımı nasıl indirebirim yardimci olurumusnuz
Great job my friend … Wishing for you all the best
Thank you!
Hola Sergei,
En play store no hay el app para usar el Smart hunter, como se ve aquí, hay otro pero no parece muy completo…
Hello, when do you expect to have discriminator complete and LM386 amp version?
Greeting
I would like to buy a metal detector.
How and where to order it and how much it costs.
Kisic Ljubomir
Belgrade Serbia
are pokies open in new zealand, united states poker tournaments and real how to earn money by making free apps gambling online united states, or no deposit
roulette bonus usa
Looking through the archives suggests this site has been doing this for a while at this level, and a look at bridgebit confirmed the long term consistency, sites that have maintained quality across years rather than just a recent stretch are sites with serious editorial discipline and this one has clearly been at it for a while.
Walked away in a slightly better mood than when I started reading, that says something about the writing, and a stop at blog66as kept that going, content that leaves you feeling more capable rather than overwhelmed is the kind I keep coming back to again and again over the years and across many topics.
Solid value packed into a relatively short post, that takes skill, and a look at pearlpath continues the dense useful content across more pages, this site clearly understands that respecting reader time is itself a form of generosity which is something most blog operations seem to have forgotten lately across the wider open web.
Worth pointing out that the writer made the topic feel more interesting than I had been expecting, and a look at softbay continued that elevation effect, content that improves the apparent quality of its subject through skilled treatment is doing something real and this site has clearly developed that kind of editorial alchemy throughout.
I really like the calm tone here, it does not push anything on the reader, and after I went through rapidrunway I felt the same way, just steady useful content laid out without drama, which is exactly what someone trying to learn something quickly needs to find rather than aggressive marketing.
Now thinking about how this post will age over the coming years, and a stop at graphflow suggested the same durability, content built to age well rather than to capture the attention of the moment is content with a different kind of value and this site has clearly chosen the long horizon over the short one.
Now feeling confident enough in this site to use it as a reference point for evaluating others on the same topic, and a look at nimbusnet continued the comparison friendly quality, sites that serve as quality benchmarks for their topic are precious and this one has clearly become a benchmark for me on this particular subject area.
Now adding a small note in my reading log that this site is one to watch, and a look at blog44generation reinforced the watch status, the few sites I track deliberately rather than encounter accidentally are sites I expect ongoing returns from and this one has cleared the bar for that elevated tracking based on what I read.
Bookmark earned, share earned, return visit earned, all from one reading session, and a look at blog44worker did the same, the trifecta of bookmark and share and return is rare in a single visit and represents the highest level of engagement I tend to offer any piece of online content these days here.
Following a few of the internal links revealed more posts of similar quality, and a stop at gladstoneblog added more to that growing pile, sites where internal links lead to more good content rather than to more of the same recycled material are sites with depth and this one has clearly built that depth carefully.
Thanks for putting in the work to make this approachable, plenty of sites cover the same ground but most do it badly, and a quick visit to blog33simply confirmed this one stands apart, simple language and useful examples without anyone trying to sell me anything along the way which I really appreciated.
Glad to have another reliable bookmark for this topic, and a look at blog44hair suggested several more pages I will be marking too, building a personal library of trustworthy resources is one of the actual rewards of careful browsing and this site is earning a place on my permanent shortlist for the topic.
A piece that did exactly what it promised in the headline without overshooting or underdelivering, and a look at softvalley continued that calibration, alignment between promise and delivery is a basic editorial virtue that many sites fail at and this site has clearly mastered the matching of expectation and substance throughout pieces.
Decided to set aside time later to read more carefully, and a stop at silkduneemporium reinforced that decision, content that earns a calendar entry rather than just a passing read is in a different tier altogether and this site is clearly working at that elevated level which I really do appreciate as a reader today.
Honestly impressed, did not expect to find this level of care on the topic, and a stop at velzaro cemented the impression, you can tell within the first few paragraphs whether a site is going to be worth the time and this one delivered on that early promise nicely throughout the rest of what I read.
Thanks for sharing this with the open internet rather than locking it behind a paywall like so many sites do now, and a stop at ardenbeach kept the same vibe going, generous helpful and clearly written by someone who actually wants people to learn from it rather than just charge them.
Reading this between two meetings turned out to be the highlight of the morning, and a stop at cipherbeach continued that highlight quality, content that outshines the structured parts of a working day is doing something well beyond ordinary and this site has produced multiple such highlights for me already this week alone.
Felt like the writer was speaking directly to someone with my level of curiosity, neither talking down nor showing off, and a stop at devgrid kept that comfortable matching going, finding writing that meets you where you are rather than asking you to climb up or stoop down feels great every time it happens.
Really grateful for content like this, it does not waste my time and it does not insult my intelligence either, and a quick look at freshtrendarena was the same, balanced respectful writing that makes a person feel welcome rather than rushed through pages of forced engagement just to keep clicking around.
Genuinely well crafted writing, the kind that makes the topic look easier than it actually is, and a look at covecanal added even more depth, you can feel the experience behind every line which is something only writers who have been at this for a while can pull off with this level of grace.
If a friend asked me where to read carefully on the topic I would send them here without hesitation, and a look at ultraengine confirmed the recommendation strength, the directness of my recommendation reflects how confident I am in the quality and this site has earned undiluted recommendations from me across multiple recent conversations actually.
Now considering carefully how to share this site with the right audience rather than broadcasting widely, and a look at microcloud extended that careful sharing impulse, content worth sharing carefully rather than spamming is content that has earned a higher kind of recommendation and this site has earned that careful shareability throughout pieces.
Worth saying that the quiet confidence of the writing is what landed first, and a look at quartznet continued that quiet quality, confident writing without the loud display of confidence is a rare combination and this site has clearly developed both the knowledge and the editorial restraint to land that combination consistently.
Now thinking about this site as a small example of what good independent writing looks like, and a stop at devsupreme continued that exemplary status, the few sites that serve as good examples are sites worth holding up in conversations about quality and this one has earned that exemplary placement through patient consistent effort over time.
Felt no urge to argue with the conclusions even though I started the post slightly skeptical, and a look at blog44which maintained that pattern, writing that earns agreement through clarity of argument rather than rhetorical pressure is the kind I find most persuasive and the kind I want to read more of these days.
Decided not to skim despite my usual habit and was rewarded for the discipline, and a stop at bridgebase earned the same patient approach, training myself to recognise sites that warrant slower reading is part of being a careful online reader and this site is the kind that helps me practice that skill regularly.
Most posts I read end up forgotten within a day but this one is sticking, and a look at tulapixel extended that lingering effect, content that survives the immediate moment of reading rather than evaporating is content with genuine retention quality and this site has been producing memorable pieces at a rate notable across my reading.
Took a screenshot of one section to come back to later, and a stop at blog44focuss prompted another saved tab, the urge to capture and revisit specific pieces of content is something I rarely feel but when I do it tells me the work is worth more than the average passing read for sure.
Now feeling the quiet pleasure of finding writing that takes itself seriously without being self serious, and a stop at amplebuff extended that subtle pleasure, the gap between earnest and pretentious is fine and this site has clearly chosen to land on the earnest side without slipping over into pretentious which is impressive.
Honest reaction is that this is the kind of writing I would defend in a conversation about good blog content, and a look at ardenbrisk reinforced that, the rare site whose work I would actively recommend rather than just tolerate is the kind I want to support through return visits regularly.
Bookmark earned and the bookmark feels like a permanent addition rather than a maybe, and a look at coilbyrd confirmed that permanent status, the difference between durable bookmarks and ephemeral ones is something I have learned to feel quickly and this site triggered the durable feeling almost immediately during my first read here.
Approaching this with the usual skepticism I bring to new sites and being slowly persuaded, and a stop at devriver continued that gradual persuasion, the careful path from skeptical reader to genuine fan is the only one I trust and this site has walked me along that path through patient consistent quality across pieces.
Probably the best thing I have read on this topic in the past month, and a stop at glideflow extended that ranking, the casual ranking of recent reading is informal but real and this site has been winning those rankings for me on this topic specifically over the last several weeks of regular reading sessions.
Most of the time I bounce off similar pages within seconds, and a stop at craterbook held me longer than I would have predicted, the ability to convert a likely bouncing visitor into an engaged reader is a quality signal and this site has demonstrated that conversion ability across multiple visits where I expected to bounce.
Reading this slowly and letting each paragraph land before moving on, and a stop at jonathangiles earned the same patient approach, content that rewards slow reading rather than speed is content with real density and the writers here are clearly producing work that benefits from the careful eye rather than the rushed scan.
If I were grading sites on this topic this one would receive high marks, and a stop at blog44within continued earning those high marks, the informal grading I do mentally for content sources is something I take seriously even though it is informal and this site has been receiving consistent high marks across multiple sessions today.
Worth recognising the absence of the usual blog tropes here, and a look at tacttech continued that fresh quality, sites that avoid the standard moves of the medium read as more original even when the content is on familiar topics and this one has clearly chosen its own path through the conventional terrain skilfully.
Definitely a recommend from me, anyone curious about the topic should check this out, and a look at stackgrid adds even more reason for that, the depth and quality combine to make this site one I will be pointing people toward whenever similar conversations come up over the months ahead at work or socially.
Comfortable in tone and substantive in content, that is a hard combination to land, and a look at slot333 kept that pairing alive across more material, this is what good editorial direction looks like in practice and the team here clearly has someone keeping a steady hand on the wheel across what they decide to publish.